Description

BS PD CEN ISO/TS 14907-1:2015 specifies the test procedures of EFC roadside equipment (RSE) and on-boardequipment (OBE) with regard to the conformance to standards and requirements for type approval andacceptance testing which is within the realm of EFC application specifically.

The scope of this part of ISO/TS 14907 is restricted to systems operating within the radio emission,electromagnetic compatibility (EMC) regulations, traffic, and other regulations of the countries inwhich they are operated.

This part of ISO/TS 14907 identifies a set of suitable parameters and provides test procedures to enablethe proof of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to thedefined requirements of an application. The defined parameter and tests are assigned to the followinggroups of parameters:

functionality;
quality;
referenced pre-tests.

An overview of the tests and parameters provided by this part of ISO/TS 14907 is given in 5.1 and 5.2.

This part of ISO/TS 14907 describes procedures, methods and tools, and a test plan which showsthe relation between all tests and the sequence of these tests. It lists all tests that are required tomeasure the performance of EFC equipment. It describes which EFC equipment is covered by the testprocedures; the values of the parameters to be tested are not included. It also describes how the testsare to be performed and which tools and prerequisites are necessary before this series of tests can beundertaken. It is assumed that the security of the system is inherent in the communications and EFCfunctionality tests, therefore they are not addressed here. All tests in this part of ISO/TS 14907 provideinstructions to evaluate the test results.

The test procedures can be used for prototype testing, type approvals, test of installations, andperiodic inspections. Thus this part of ISO/TS 14907 defines only the test and test procedures, not thebenchmark figures that these are to be measured against.

Related to a conceptual model of an EFC system, this part of ISO/TS 14907 relates only to the equipmentof the user and the service provider as illustrated in Figure 1. Any other entities are outside the scope ofthis part of ISO/TS 14907.

Cross References:
ISO/IEC 17025
ISO/IEC 17065:2012
ISO/IEC 2382-1:1993
ISO 9000:2005
ISO 9001
ISO 9004
ISO 11451-2
ISO 14906
ISO/TS 14907-2
ISO/IEC 15408-1:2009
ISO/IEC 15408-2:2008
ISO/IEC 15408-3:2008
EN 60721-3-3
EN 60721-3-5
CEN/TC 278 [N318]:1994
ENV 50204
ETSI/TS 102 486-1
ETSI/TS 102 486-2
EN 12253:2004
EN 12795:2003
EN 12834:2003
EN 13372:2004
72/245/EEC:1995
ETSI EN 300 674-1
EN 61000-6-3
IEC 61000-6-3:2006
EN 61000-6-1
IEC 61000-6-1:2005
EN 55015
CISPR 15:2000
EN 55022
CISPR 22:2008
IEC 61000-4-2
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
IEC 60068-1:1988
IEC 60068-2-1:1990
IEC 60068-2-2:1974
IEC 60068-2-5:1975
IEC 60068-2-6:1995
IEC 60068-2-10
IEC 60068-2-11
IEC 60068-2-14:1984
IEC 60068-2-17:1994
IEC 60068-2-27:1987
IEC 60068-2-29:1987
IEC 60068-2-30:1980
IEC 60068-2-32:1975
IEC 60068-2-64:1993
IEC 60068-2-42
IEC 60068-2-43
IEC 60068-2-46
IEC 60068-2-49
IEC 60068-2-52
IEC 60068-2-52:1996
IEC 60068-2-78
IEC 60068-2-78:2001
IEC 60068-3-4
IEC 60068-3-4:2001
IEC 60529
IEC 60721-3-3
IEC 60721-3-3:2002
IEC 60721-3-5
EN 300 674-1
ETSI EN 300 674-1 V1.2.1
ETSI/TS 102 486-1-2 V1.2.1
ETSI/TS 102 486-2-2 V1.2.1
ISO 7637-1
ISO 7637-2
ISO 11451-2
ISO 11451-3
EN 50413
IEC Guide 107
ARIB STD-T75
ARIB STD-TR-T16
ISO/TS 17444-1:2012
ISO/TS 17444-2:2013
ISO/TS 19299:2015